WM-6P 6-SLOT WALL MOUNT CHASSIS

Introduction

Specially designed for the factory floor and other harsh industrial environments, the WM-6P Node IPC chassis is ideal for system integrators or users who require a compact, rugged PC/AT compatible system.

The WM-6P features a space for 6-slot passive backplane and space for a standard PS/2 power supply. The optional power supply supports a full set of cards plus drives and meets UL, CSA, VED and IEC standards. The chassis has space for two 3.5" floppy disk drive and one 3.5" hard drive. ON/OFF LEDs and a reset switch are also included.

A patented-buffered clamp protects cards from vibration. One 8x8cm intake cooling fanpre surizes the case to keep dust out. A front-loading filter makes filter replacement easy. This 6-slot enclosure puts a PC bus system in the tightest of spaces. The chassis is only 10" wide and can easily be mounted on panels or walls with the supplied brackets.

It's an inexpensive choice for both disk-based and diskless systems. You can install conventional disk drives, but for maximum protection against equipment failures we suggest that you install a solid-state Flash / RAM / ROM disk card or one of our CPU Cards with DiskOnChip Socket. In this way you can create a "diskless" remote station or cell controller that's cost-effective and extremely durable.

Specifications

General

  • Rugged construction for harsh environments
  • Support 6-Slot ISA or PCI/ISA PICMG passive backplane
  • Support two 3.5" disk drives and one 5.25" hard disk drive
  • Support popular PS/2 type power supply
  • Front panel power switch, reset switch and HDD, Power LED
  • Front cooling fan with removable air filter
  • Hold-down clamp design to protect the plug-in cards to eliminate vibration
  • Removable mounting brackets for wall mount or panel mount
  • Paint Color: black.

Passive Backplane

  • PCI-6SB

Disk Storage:

  • Space for two 3.5" ; disk drives and one 5.25" driver bay

Operating Temperature:

  • 0¢XC to 55¢XC

Humidity:

  • 10% - 90% RH

Vibration:

  • Sweeping frequency: 5~35~200Hz
  • Amplitude: 0.6mm (zero to peak)
  • Acceleration: 1.5G

Power Supply

  • Support the popular low cost PS/2 type

Dimensions:

  • W-254mm
  • D-410mm
  • H-175mm
¡@

Wm-6p.gif (148764 bytes)

  • Front panel of WM-6P

Keyboard Connector:

  • Standard Keyboard connectors available on both front and rear panels

Cooling Fan:

  • One front cooling fan with removable air filter

Safely

  • Meets FCC class B and CE class B approved

Wm-6pinner.gif (165644 bytes)

Technical Drawing